Makes aggressive tap water suitable immediately
AquaMaker is a powerful, fast-acting water conditioner. It makes aggressive tap water immediately ready for use in all freshwater and saltwater aquariums. AquaMaker is also suitable for reef aquariums and ponds. It is also absolutely safe for all fish, plants, corals, shrimp, snails and the biological filter.

AquaMaker is very versatile:

Removes chlorine
Removes chloramine
Removes heavy metals such as copper, zinc and lead
Binds and detoxifies toxic ammonia
Binds and neutralizes nitrite
Binds and neutralizes nitrate
De-stress fishing
Protects the mucous membrane and gills of fish
AquaMaker does not affect pH, KH or GH. In a saltwater aquarium it will not make the skimmer overactive.

Application

AquaMaker is best added to the tap water used during the water change. Then only use the dosage for the volume of this new tap water. In this way, aggressive substances are immediately neutralized.

AquaMaker can of course also be dosed directly to the aquarium. Then base the dosage on the total volume of the aquarium water.

Dosage

The normal dose is 10 ml per 50 liters of aquarium water. Shake before use. The product may have a sulfur odor.

Example dosing to tap water before the water change:
5 buckets of 10 liters each are filled to change water. Then dose 2 ml of AquaMaker in each bucket, mix it briefly and then immediately pour it into the aquarium.

Example dosing to an aquarium:
An aquarium has a water volume of 100 liters and 20 liters of water have been changed. The dosage of AquaMaker is then for the total water content, in this case 100 liters. The dosage will then be 20 ml AquaMaker.

Deviating dosages – concentrations of chloramine, chlorine and nitrite & water temperature

* use half a dose of AquaMaker (5 ml per 50 litres) with low concentrations of chlorine, chloramine or ammonia

* use a double dose of AquaMaker (20 ml per 50 litres) for higher concentrations of chlorine, chloramine or ammonia

* emergency: use a 3-fold dose of AquaMaker (30 ml per 50 litres) at very high nitrite concentrations (3 mg/l or higher) or ammonia values ​​(1 mg/l or higher)

* do not use more than half a dose of AquaMaker as soon as the water temperature rises above 30 ºC (= 86 ºF)